Skip to content

Premise Termite Granules

  • Product Overview
  • Benefits
  • Target Pests
  • Product Overview

    Premise Granules are a non-repellent granular termiticide that can be used as a perimeter application or spot treatment to eliminate live termite infestations in an outdoor environment adjacent to structures. Premise Granules is only intended to kill live termites present at the time of application, and will not provide ongoing structural protection against termites.

    Premise Granules are designed to be moisture activated, whereby the non-repellent active ingredient, imidacloprid is released when the granules come in contact with water. If rainfall is not expected shortly after application, the area should be irrigated.

  • Benefits & Use

    Premise Granules provide for an easy-to-use means of eliminating active infestation of subterranean termites without any heavy equipment or the need for mixing, trenching, or spraying.
  • Target Pests

    Subterranean termites.
  • Product Video
  • Label / SDS
  • Tech Specs
  • Product Video

  • Label / SDS

    Product Label

    Safety Data Sheet

    Safety Data Sheet (Spanish)

    Product Information Sheet



  • Tech Specs

    Active Ingredient: Imidacloprid 1%

    Manufacturer: Bayer Environmental Services

    Formulation: Insecticide Granules

    Approved Sites: Premise Granules can be applied to bare soils, landscaped areas and turfgrass immediately surrounding commercial and residential structures, as well as other wooden constructions subject to termite attack. Applications should not be made when areas are waterlogged or when the soil is saturated with water. Adequate distribution of the active ingredient into the soil where termites are active cannot be achieved when these conditions exist.

    Application Information: Please refer to the product label for complete application instructions and use restrictions.

    This product can be used as a perimeter band application 3 to 10 feet wide around and adjacent to the structure foundation in commercial and residential areas. To kill subterranean termites foraging near commercial and residential structures, apply this product at a rate of 1.8 lb. (29 oz.) per 1,000 sq. ft. Irrigation of treated areas (not to the point of run-off) will move the active ingredient through the thatch layer in turf, through ground covering and into the underlying soil where termites forage.

    Apply this product uniformly over the area being treated with standard granular application equipment; including handheld spreaders or shaker cans, and wheel-mounted spreaders.

    Soil Incorporation: Use this product to make spot treatments to kill termites in soil which may be present at the time of application. Incorporate this product in localized areas of soil along the foundation of commercial and residential structures, or in soil adjacent to other threatened wooden constructions. After digging a narrow trench (about 6 inches in width and 6 inches in depth), uniformly incorporate 1/6 lb. (3.0 oz.) of this product per linear foot of trench. Mix this product thoroughly with the soil when backfilling the trench. Alternately, incorporate at a rate of 1/3 lb. (5.0 oz) of this product per sq. ft. of surface at critical areas such as around plumbing, bath traps, utility services or wells/cisterns, and around poles or posts, fencing and decking materials, landscape timbers and similar non-structural wood-to-soil contacts.

    Not For Sale To: MA, NY

    EPA Registration: 432-1385